PDA

View Full Version : Wanted - .20 vartarg dies


jim saubier
01-25-2007, 02:46 AM
anybody got a set of dies, or a FL die, wilson seater, ???

SteveLC
01-25-2007, 04:09 AM
Sorry, I don't have any to sell but did recently order a set from an Ebay dealer. Redding Match dies with the micro seater, 's' type FL sizer for $139 which was $20 better than I could find them anywhere else.
http://cgi.ebay.com/Redding-Type-S-Match-Full-Die-Set-20-Vartarg-36636_W0QQitemZ180025582289QQihZ008QQcategoryZ3182 5QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

Best option I could find for new ones.

Steve

Chuck Miller
01-25-2007, 04:32 PM
I couldn't find anything that wasn't over 100.00 with a hefty wait so I called up Redding direct and bought a Bushing neck die directly from them and used my 204Ruger Hornady seater which isn't cartridge specific. Worked great and I was stunned how straight it seated once I checked the run out. Used a 221FB FL die with the expander removed, the nk die and shoot. Results from formed ammo were so good I haven't bothered to buy anything else, figured I wasn't gonna improve so why spend the money.

Paul McClain
01-25-2007, 07:27 PM
Hornady Custom Grade New Dimension #217103 at Midway $60.99 I bought a set of these last fall and tested ammo off these against ammo loaded with my Wilson dies. The results were very good. Bullet run-out was less than .003 Grouping was as good as the Wilson loads. Mid .3's to mid .4's was not a problem. Paul