PDA

View Full Version : WoodChuckDen bullets

basswalleye
03-01-2007, 01:41 AM
I need the overall lengths of there bullets like the 25 and 30 grain Gold bullets. Can anyone help me! thanks
17VLD
03-01-2007, 03:52 AM
That the 27 and 30 are the same at .670"
However my calipers are junk and off by .006" on the short side
so they should be pretty close to .675"
However you slice it Todd makes some awesome bullets,give him a call
you'll be glad you did.
Matt
basswalleye
03-05-2007, 04:11 AM
Anyone else who has a good set of verniers who can tell me the lengths?
YUKON454
03-06-2007, 10:09 PM
Anyone else who has a good set of verniers who can tell me the lengths?
My Vernier and Micrometer agree...at least on 30 .90 BTails.
From .6656, (from the Mic.) to .670. Tried about a dozen of them. Most were .667. Saving a couple that were .666 for 'special occasion':-)
Don't have any 25's, sorry.
basswalleye
03-08-2007, 01:29 AM
What is the length on these bullets! THANKS!
Silverfox
03-08-2007, 04:23 AM
basswalleye--The 25 gr. V-Max bullets I have are from Lot #2050635 and they vary in length from .6710" to .6730".
Silverfox
03-09-2007, 12:15 AM
Just got a chance to measure some of the 30 gr. Golds that I have on hand. The length of mine measured from .665" up to .6685", with the majority of them coming in at about .667"
basswalleye
03-09-2007, 10:52 AM
Thanks Guys! I'm making a wildcat 17 cal. and need to know what's going on with these bullets so I can determine barrel twist for my HOT ROD!
reed1911
03-09-2007, 04:32 PM
Whatca makin? Bunch of folks here that will give you free advice and lots of help.