Furhunter
03-05-2014, 09:06 PM
I had built this 6BR bench gun a good while back and honestly I'm just not shooting it so its time to turn it into something that get a bit more use. Im going to swap out the stock for something else. The only thing being sold here is the stock.
Heres what it looks like on the rifle.
Short action Remington 700
http://img.photobucket.com/albums/v607/plinkerpics/DSC00271.jpg (http://smg.photobucket.com/user/plinkerpics/media/DSC00271.jpg.html)
http://img.photobucket.com/albums/v607/plinkerpics/Scopes%20for%20sale/file_zpsd9bcbbcb.jpg (http://smg.photobucket.com/user/plinkerpics/media/Scopes%20for%20sale/file_zpsd9bcbbcb.jpg.html)
Other side.
http://img.photobucket.com/albums/v607/plinkerpics/Scopes%20for%20sale/file_zps6b345616.jpg (http://smg.photobucket.com/user/plinkerpics/media/Scopes%20for%20sale/file_zps6b345616.jpg.html)
Its been clear coated and theres not so much as a scratch on it that I can see. I had a single shot follower installed and it was bedded around it. One might have to dremel out that high spot for clearance but your stock 700 should drop in this without too much trouble. I'm including the action screws and trigger guard also.
The barrel on this rifle is a straight taper 1.250 - .950 so the channel in the stock should handle most heavy, varmint and some bull barrels.
Posted on Multiple sites. NO TRADES.
Again... Stock only.
450.00 Shipped.
Heres what it looks like on the rifle.
Short action Remington 700
http://img.photobucket.com/albums/v607/plinkerpics/DSC00271.jpg (http://smg.photobucket.com/user/plinkerpics/media/DSC00271.jpg.html)
http://img.photobucket.com/albums/v607/plinkerpics/Scopes%20for%20sale/file_zpsd9bcbbcb.jpg (http://smg.photobucket.com/user/plinkerpics/media/Scopes%20for%20sale/file_zpsd9bcbbcb.jpg.html)
Other side.
http://img.photobucket.com/albums/v607/plinkerpics/Scopes%20for%20sale/file_zps6b345616.jpg (http://smg.photobucket.com/user/plinkerpics/media/Scopes%20for%20sale/file_zps6b345616.jpg.html)
Its been clear coated and theres not so much as a scratch on it that I can see. I had a single shot follower installed and it was bedded around it. One might have to dremel out that high spot for clearance but your stock 700 should drop in this without too much trouble. I'm including the action screws and trigger guard also.
The barrel on this rifle is a straight taper 1.250 - .950 so the channel in the stock should handle most heavy, varmint and some bull barrels.
Posted on Multiple sites. NO TRADES.
Again... Stock only.
450.00 Shipped.