PDA

View Full Version : 14/221 Walker Data


457ciSBC
10-22-2006, 06:06 PM
Anyone have any data with H4198, Tu2000, N120 or N130?

Mike

RareBear
10-22-2006, 06:27 PM
I have quite a few loads from Blaine Eddy all of which use a slower powder than you mention, in an 8.5" twist barrel by the way. Are you looking specifically for faster powder/light bullet/slower twist loads?

457ciSBC
10-22-2006, 06:49 PM
I have quite a few loads from Blaine Eddy all of which use a slower powder than you mention, in an 8.5" twist barrel by the way. Are you looking specifically for faster powder/light bullet/slower twist loads?

RareBear, I was looking for the faster powder loads but I take any data.

Mike

twisted 14
10-23-2006, 12:51 AM
This is what I have for my 14 walker, they are max loads with mag primers

H4198 13.4
W748 16.8
AA2015 15.2
H335 16.8

Loaded with 17gr bullets 1.750 OAL
If you need the other powders I can run them on quick load program and get you a good idea were to start. The walker case is improved a litttle so that that in to effect.

RareBear
10-23-2006, 06:16 AM
I have an Excell spreadsheet containing load data from several sources including the loads mentioned by Twisted 14. It looks like the attachment portion of this website software is'nt up and running, so just post or PM or email your email address to me and I'll send it to you or anyone else interested.

Fred in NE Ohio
10-23-2006, 10:25 PM
Hi Guys

May I ask who built your rifles. I have a new 221 FB that I would like to have made into a 14/221. I was thinking of sending it to Pac Nor and have them put one together for me but I have not gotten any feed back from anyone on Pac Nor 14 cal barrels. Any opinions?

Thanks
Fred

twisted 14
10-24-2006, 10:36 PM
I built my 2 14's, one on a HOWA 1500 action and the other on a
Remington Short action. I do have the reamer for the 14 Walker if you are interested in building one. I did use a LRB on both rifles. I have never used or know anything about Pac-Nor barrels. I do know LRB makes good barrels if you dont mind waiting.

Hammer
10-25-2006, 01:53 AM
Have 14-221 Walker barrel.

Have case forming and loading dies.


Need bullets.

Need cleaning rod, jags, brushes.

Need powder funnel.

Contacts please.

Hammer

457ciSBC
10-25-2006, 03:02 AM
I was lucky enough to run across a complete package on eBay minus a funnel.

I did purchase some 17.5 grain bullets from Genco, 828-684-5797

For a funnel I also purchased a small metal and plastic funnels used for pouring perfumes from eBay as well.

I would like to have a longer cleaning rod. I found all the materials to make a ball bearing handle cleaning rod, just never followed up.

I think you can get a jag, cleaning rod and funnel from Jeff Lawrence, 406-883-9324

reed1911
10-26-2006, 12:14 PM
We should have them in stock by the end of the year, we are having a run made of the rods, brushes, and jags.

tim simbari
10-26-2006, 12:49 PM
I sure would check out AA1680 as well. I've pretty much used it as the go to powder for the small stuff . I use it for .221, R2, .17CCM, .14 Walker Hornet.