Saubier.com

Saubier.com (http://www.saubier.com/forum/index.php)
-   Small Caliber Discussion Board (http://www.saubier.com/forum/forumdisplay.php?f=2)
-   -   20 VT "short" range report. (http://www.saubier.com/forum/showthread.php?t=21004)

Nor Cal Mikie 01-09-2013 10:18 PM

20 VT "short" range report.
 
Keep in mind that this is a 16" barrel on a bolt action Savage rear grip pistol. Groups are shot at 25 yards to get it on paper ans see how the reformed brass is working.
Got a few split necks so anealing is in order. No pressure signs.
Started off with AA2460 with 39 grain bullits.
Fired another batch with 32 grain Noslers and AA2230.
A little more felt recoil with the AA2230 compared to the AA2460.
5 shot groups with the 39 gr. Sierra Blitzkings and AA2460.
13.2= .212
13.3= .308
13.4= .181:D
One 10 shot group at .414.;)

Another batch with AA2230 and 32 grain Nosler Ballestic Silvertips.
12.5= .163
12.6= .126:D
12.7= .193
12.8= .313

Got one in possesion and another 25" Green Mountain straight pipe blank on the way.
One for the 20 VT and the other for the 20 VT "short". The "short" may get cut to 20". Still thinking on that. Both are for rifle stocks and bench shooting.
After the first few shots, I had a hard time wiping the grin off my face. Things are looking up and so far, no problems to deal with.
Brass problems? I expected that but I had to fire a few to see the results.
I make it a point to only take one shooter at a time so I can concentrate on the work at hand. Too many distractions and you don't get the results you went after.
No Chrony results till they all start going in the same hole. Longer barrels will probably make a big difference. And the longer (heavier) barrel won't move when it get a round down the pipe.
All in all a good morning at the range.:cool:

Virginian 01-09-2013 11:13 PM

Looks like you have a real shooter there! Congratulations!

Eric

rickiesrevenge 01-10-2013 12:43 AM

Do you have any pictures of your pistol? I really like bolt action pistols:D

Aaron

Nor Cal Mikie 01-10-2013 01:04 AM

I've tried sending pictures but my computer is on it's way out. Time for a new build.;)

Bodei 01-10-2013 03:07 AM

It didn't happen until the pics show up!

When you say 20VT short, you are referring to the weapon or the round?

Nor Cal Mikie 01-14-2013 09:18 PM

The "round".;) 20 VT shortened by .200" from 1.400".
14 grains of AA2460 at the shoulder/neck junction. Less powder= less recoil.;)
Just about NO recoil with the short barrel. A longer heavy barrel should be exactly what I'am after. I don't want that sucker to move when I pull the trigger.
2nd. blank should be here in a few days then both off to be chambered.
One in 20 VT and the short chambered for the "short".
So far, accurecy is what I was hoping for.:cool:


All times are GMT. The time now is 11:37 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.