Put the little washer type spring in the slot in the action with the little tab
resting on the side of the mag well.
Now with the magazine removed, install the bottom metal with the thumb release lever in the slots in the bottom metal.
Now install the bottom metal. The release lever cannot fall out now.
Holding the bottom metal into the stock. At the same time holding the release lever away from the bottom metal, out towards the stock.
The action with the washer spring installed will go in easy.
As soon as you get it together, push on the release lever toward the bottom metal. You will now feel the spring.
If it is easier for you, put the action in first. Install the bottom metal, holding the lever away from the bottom metal. It will go right in.
The position of the trigger on one of my rifles will not let me install the action first. Kenny
The short version.
[ Hold the end of the release lever away from the bottom metal.]
__________________
sicero
I pride myself in being able to make decisions with little information.
|