Quote:
Originally Posted by Jaybird
I load the 17 Hornady Hornet, 19 Badger, .19-223, .19 Calhoon, .204 Ruger and .20 practical all on a 550C. I size everything on a Rockchucker and hand prime before I run them through the Dillon.
|
I only neck size my loads, if you full length size I would do that separate like you, as it may alter the accuracy of the powder drops. My method, the Dillon does the sizing and priming. That way I get a fully loaded round in one pass. Really speeds up the process.