#1
|
|||
|
|||
Vartarg neck diameter w/Lapua 221
What loaded diameter are you guys coming up with for 20 Vartarg using Lapua 221brass ?
|
#2
|
|||
|
|||
The Lapua i was around was .2315- .232 loaded.
|
#3
|
|||
|
|||
Area of measurement I have found also. But you can vary that, like with any neck, by neck trimming and keep them around .012 to 013 in thickness.
|
#4
|
|||
|
|||
Thx Guys , I think I might need to get a reamer ground.
|
#5
|
|||
|
|||
You can do that or turn the necks a little, which would be my preference to get an ideal fit.
|
#6
|
|||
|
|||
I would get the .200 line little bigger also for the Lapua brass to stay away from clickers also.
I cant remember how much bigger than for the Rem bit I'm sure JGS or Manson could. |
|
|