Saubier.com  



Go Back   Saubier.com > Saubier.com Forums > Small Caliber Discussion Board

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-19-2011, 05:07 PM
Dean2 Dean2 is offline
Supporting Member
 
Join Date: Jan 2010
Location: Alberta
Posts: 2,497
Default Devcon 10110 for Bedding Rifles

Starting last year I ran out of and could no longer get my favourite bedding compound "Micro-Bed". I tried a nubmer of others over the years and never was entirely satisfied. After reading so many good things about Devcon, decided to try it. Took some learning time, and it behaves WAY different than the any of the compounds I previously used.

What I learned;
Kiwi clear shoe polish is the best release agent. Per all the website postings, tried Pam, wood floor wax, auto wax, carnuba car wax and release agent. Top two are Kiwi and Carnuba based was, whether floor or auto.

You must get the mix ratios very close. If you have the gear to do it by weight 9:1, this is far superior to trying to judge the 2.5:1 volume.

Make sure you fill any voids that will cause mechanical locking with plastercine and make sure you wax ALL metal on hte gun, including the bottom metal and action screws, and any part of the wood exterior where you don't want it to stick. Once this stuff is hard, it is strong as hell, does not compress and is hard to fracture.

If you get a tight lock that won't release with a pop on the barrel with a rubber mallet, put the whole thing in the freezer for about three hours. This will make popping it loose muuch easier.

Overflow, clean up large bits with a popsicle stick. The residue cleans up real well with Hoppes #9 on a cloth patch or piece of paper towel. It iwll also clean it off your hands well.

To get a perfecT, void free job, you should leave the gun set up for 24 or better yet 30 hours. It will actually pop out much easier and cleaner than if you try to take it out early, as long as you have no mechanical locks or parts you forget to put polish on.

I would be interested in any tips ohers have for using Devcon.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:53 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.