#1
|
|||
|
|||
WTD 221 FB neck die & RCBS bench primer
Fellas just looking for a plain Jane 221 fireball neck die, Redding, RCBS, Forster but I don't think they make one anymore also one of the RCBS bench mounted priming tools.
Unrestricted items so no problem there but postage could be a pain. I have pay pal Thanks Johno |
#2
|
|||
|
|||
Johno, I had the same need and resolved it two ways: (1) Took an RCBS .223 Remington sizing die and had it shortened and bored out so only the neck area did anything and (2) got a Lee .221 FB sizing die body and guts, also had it bored out so only the neck works. Both do the job fine. The "machining" process could easily be a DIY process with emery paper wrapped around a dowel. The Lee die sets are cheap enough, so if they won't sell you a die body only, you could get a set and pitch the seater. Lee used to be pretty good about selling die parts, lately not so hot.
The RCBS priming tool you're wanting -- is that the one that uses priming strips (I think they call them APS strips)? If so, I'm pretty sure my shooting partner has one that he doesn't use. I will check on that on reply. Hope this will help! |
#3
|
|||
|
|||
Thanks for the reply mate, RCBS now make a neck die so I will go that if I can find one
The primer tool I am after is style older style using the tubes Johno |
#4
|
|||
|
|||
Hornady makes, or did the last time I checked, generic neck dies. I like them for the elliptical expander ball.
|
#5
|
|||
|
|||
Read somewhere that a 22 PPC neck die can also work.
|
Thread Tools | |
Display Modes | |
|
|