722 Action for sale

[JoeZ]

722 action 223 bolt face. Receiver and lug trued by Kevin Weaver . F/P bushed and Sako extractor installed by Greg Tannel. Trigger is a Timney set at a hair under 2lbs. Has ULA safety so it rides the receiver like a 700. Gre-tan F/P assembly. 700 BDL bottom metal. Box follwer and action screws included. Everything but the trigger has been cera-coated in matte black

Action has a Pac-Nor 1/9 Fluted #4 at 22 inches. Just a WAG but there should be plenty of barrel to make a 18inch + 17AH.

FFL rules apply. $550.00 and I will split the shipping. I have a banser high tech. I will throw in for another $100.00.


Selling to funs a Stiller action.

email me for pics.

[rippit]

will this action fit in a rem 700 SA stock

[JoeZ]

With some extra fitting. 722s ride a little lower. if you were going to bed anyway it is not a big deal.

I need to post some pics in the am.

[rippit]

I am looking for a reminton action to build a 223AI, and was planning on putting it in a hs-precision or bell and carlson medelist stock. so I wasnt planning on bedding on acount of the aluminum bedding blocks already in the stocks. will the action work in these stocks. I dont know if either company makes stocks for the remington 722 action. what is the banser high tech

[JoeZ]

Sorry this took so long. Here are pics. Let me know if you guys need others.

Rippit, IMHO any stock with a F/L bedding block needs a skim bed to pull out the full potentail. My 2 cents, unless a stock is carved from wood to fit YOUR action it will need some glass. A call to HS or Bell and Carlson would let you know about fitting, the are not exact but can be made to work. I hog out alot of materiel, then fit the stock to the action with glass, so this one was a breeze. Stock is currently spoken for to a 10 year old getting a new deer rifle this year.

The cerra-coat is a super flat black baked on ceramic finish. It get cleaned with a damp rag. The action has some minor handleing marks. Lighting makes it look like rust. 3 day inspection there is no corrosion on this action.

[Bad Dad]

What is it chambered for now? is the barrel a 17cal? You said it has a 223 boltface with the extractor do you know if that would work ok for a 17ah without having to redo the extractor?
thanks
Greg

[harrens@adelphia.net]

A conversion to 17 AH will require boltface and extractor modification.

[JoeZ]

It is a 17-222AI. The throat has gotten long. It shoots well but I can not keep a bullet in the case and use it as a repeater. The barrel comes for free. There should be enough barrel (Pac-nor 1/9 #4 fluted) to make a 18+ inch 17AH on another action 77/22 or CZ.

The action as said in the 1st post is a 223 bolt face in BDL configuration

[rippit]

joe I will take the action.

if you give me your email, I will email you all my info and get all of your info as well.

thanks

[JoeZ]

Sold pending funds to Rippit.

Rippit you have a PM