#11
|
|||
|
|||
22br?
Hey, that wasn't in the OP.........., and even then I would take a 22PPC
|
#12
|
|||
|
|||
If you have the need for speed then there is the 223WSSM it will shoot on par with the 22-243Middlestead.
|
#13
|
|||
|
|||
Ramos - Was not recommending the Swift.
Just said IF he decides on it then blah, blah, blah. I was concerned about my inability to use Nosler brass and wanted to warn him of needing to measure his intended brand of brass neck wall thickness before having a chamber made.
Chuck |
#14
|
|||
|
|||
thanks everyone for the info. you have given me other ideas to research. i had considered the 22BR but was told it was basically a single shot due to feeding problems. i will look closer at it. also, i do not know what to expect from a 10 twist. thanks again.
|
#15
|
|||
|
|||
Given any thought to a 222 Magnum AI? Plentiful brass (use 204 Ruger brass and neck up)....and with regards to the brass neck thicknesses versus reamer dimensions.
|
#16
|
|||
|
|||
New build
Before I went Swift I'd consider the 22-250 AI or the 220 Wilson Arrow.
__________________
NRA Lifetime Member NBRSA Member |
Thread Tools | |
Display Modes | |
|
|