#1
|
|||
|
|||
what's your experience, CZ 7.62x39 action and the ppc case?
Well just tumbled to one of the CZ actions in 7.62x39. Want to hear from those that chambered them in a PPC case, 20 up to 6mm. I know CZ is coming out with a 6.5 Grendel, I can wait for that one. I do have an XCaliber 1-11" 3 groove 20 cal laying on my bench. Would even consider a 6ppc. Concerned about how they feed.
For those on the hunt, GB has a lot of these actions on no reserve auctions by Sportsman's Supply, I picked this one up for 305.00 complete with mag and bottom metal. Last edited by Chuck Miller; 02-18-2017 at 05:20 PM. |
#2
|
|||
|
|||
Darn, that's a lot cheaper than I paid last year.
|
#3
|
|||
|
|||
Have a 22 PPC and a 6mm AR built on 7.62x39 donor rifles. 7.62x39 rounds feed flawlessly in the factory rifles, but the same can't be said of the 22 PPC and 6mm AR rounds. All this should be addressed by the new CZ magazines designed for the 6.5 Grendel
John |
#4
|
|||
|
|||
6mm AR
What are the specs on the 6mm AR, not familiar with that one? I would even consider the 220 Russian or some of the variants built on that case, I'm just set up for all the PPC versions. I might wait until the Grendel comes out and pick up a mag and sell this 7.62-39 mag.
Yea Ray, I just threw a low number at them and when I'm outbid I drop to the next one. When you see a bunch of the same thing like that it's ripe for picking if your diligent. |
#5
|
|||
|
|||
Chuck
I built most every cartridge based upon the 7.62/PPC case all on CZs-Got a lot of Happy Friends that now own them! My Absolute favorite was the 6AR (Grendel necked down to 6mm) CZ is THE best Platform for these cartridges if you want the cartridges to feed well in a repeater configuration. You won/t be disappointed in any of the PPC based cartridges on a CZ! Bill
__________________
"Burn Powder, Not Comrades"! |
Thread Tools | |
Display Modes | |
|
|