#1
|
|||
|
|||
Tac 20 and Benchmark?
Was wondering if anyone out there used Benchmark in their tac20. I was wanting to use it with the 40gr V-Max but am unable to find any good load info on it. I also have some 32gr v-max's I was thinking about trying. Right now I'm using 40gr v-max with 26.5 varget but was looking to try something else. Any info you could give would be greatly appreciated. Reno
|
#2
|
|||
|
|||
You can look on the Hodgdon site...
... and find some good loads. I happen to have a print out right here, and they recommend:
33gr. VMax, Benchmark start: 23.0 gr., 3506 fps; MAX: 25.5 gr., 3844 fps They only other load they list the 36 gr Berger HP. www.hodgdon.com Check it out. It will also give you an idea how Benchmark and Varget compare so you can have some idea how low to start with the Benchmark. Alex Last edited by Alex; 01-28-2007 at 04:52 PM. |
#3
|
|||
|
|||
20-tac and benchmark
hi my cooper likes ,lapua brass 7.5 benchmark 25.9 and 40vmax 2.314oal shoots .453 at 100yds.at3781fps.this load is close to max.
|
#4
|
|||
|
|||
I use 26.3grs of Benchmark, R 7 1/2's, IMI brass and either the 39 Sierra or 40Vmax(both mollied) in my 26" Krieger 1x11 and they run from 3850-3870 fps over my Oehler at 10'. Sub 1/2" 5-shot groups easy.
|
Thread Tools | |
Display Modes | |
|
|