#1
|
|||
|
|||
Help with a load request
Friend just bought a 22_250 and asked me to reload for it.
Only powder we could find suitable was 4064. BUT not IMR, it was Accurate brand 4064.(my fault). Got 2#s of it. I can find no data for it for use with 55 grain bullets. Anyone use it or have a idea for a starting load? Thanks for any help. |
#2
|
|||
|
|||
#1, for liability reasons, I would not reload for another person and their rifle.
#2, call Accurate and ask their tech if it is a good powder and/or for load info for it's use in a 22-250. You sure don't want to be the cause of your friends injury or worse, with your reloading of the wrong powder, etc. |
#3
|
|||
|
|||
Accurate site shows 33.3 to start and 37 max. with 55 vmax Their site isn't the best but check it out.
|
#4
|
|||
|
|||
Accurate is now part of Hodgdon and load data can be found on the Hodgdon site and is easier to navigate in my opinion.
|
#5
|
|||
|
|||
Thanks fellas.
I did some loding today. Small batch size starting at 34 up to 37. Hopefully a good start. |
#6
|
|||
|
|||
Ended up loading 4 rounds each starting it 34,35,36,37.
They all shot groups about 5/8th inch at 104 yards. Good enuff for coyotes. 37 grains showed no pressure signs so gonna stick with that. Thanks fellas. |
Thread Tools | |
Display Modes | |
|
|