|
|
|
| |
|
#1
01-28-2017, 08:08 PM
|
|||
|
|||
22Nosler test coming
I told a buddy of mine about the new round. Today he tells me he has an upper on the way and it should be here on Monday. So will be off to the Range next weekend to give it a test run. Will report back on results. Upper was $1200.00 and for another $450.00 he could have had a side charger but opted to pass on that.
__________________
Never tell the Platoon Sgt you have nothing to do 
|
|
#3
01-29-2017, 01:06 AM
|
|||
|
|||
|
What brand? Noveske?
|
|
#6
01-29-2017, 02:06 PM
|
|||
|
|||
|
nosler needs a new proof reader, they show both bullets(55&77) at the same velocity in 2 places . I don't think I am reading it wrong.
Approaching 22-250 velocities in a significantly smaller package, the 22 Nosler® yields nearly 25% more capacity than the 223 Rem/ 5.56 NATO making the round capable of pushing a 55gr. Nosler Ballistic Tip bullet at 2,950 fps out of an AR-15 fitted with an 18” barrel and a 77gr. Custom Competition® bullet at 2,950 fps. Nosler® Trophy Grade™ Ammunition— 55gr. Ballistic Tip 3,500 fps (24” SAAMI test bbl) | 3,350 fps (18” gas-op semi auto) Nosler® Match Grade™ Ammunition— 77gr. Custom Competition 3,100 fps (24” SAAMI test bbl) | 3,350 fps (18” gas-op semi auto)
__________________
I post here because it keeps the riffraff away. 'Life's Journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting, Holy sh!t... What a Ride!
|
|
#7
01-30-2017, 06:03 PM
|
|||
|
|||
|
Fox,
looks like one of those "how you read it" It says 2950 fps out of an 18inch barrel but does not state barrel length concerning the 77gr bullet, which could very well be 24inches hence the same speed for different weight bullets. Maybe? I do see the 3100 vs 3500 fps so maybe they simply messed up? Last edited by Jingle; 01-30-2017 at 06:07 PM.
|
|
#8
01-31-2017, 07:34 PM
|
|||
|
|||
|
OK I got the cost wrong. It was $450.00 for the upper and $50.00 extra for the side charger. It is a AR-Stoner purchased from Midway. 18 inch fluted SS Barrel with a 1 in 8 twist.
__________________
Never tell the Platoon Sgt you have nothing to do
|
|
#10
02-08-2017, 07:09 PM
|
|||
|
|||
|
Steveo
When you get your hot grubbies on some OEM loaded brass, can you mike the brass just ahead of the extraction groove, and provide those measurements? I have the printed spec's for this area, but wanted to see the actual sized spec's of OEM brass etc. I have a Wild wildcatter dream showing up.  Tia, Don
__________________
"ANY person that fears me owning a firearm, then I have reason to not trust that PERSON" ------------------------------------ "We must reject the idea that every time a law's broken, society is guilty rather than the lawbreaker. It is time to restore the American precept that each individual is accountable for their actions." Ronald Reagan
|
 |
|
|
Bill K 
Linear Mode
