#1
|
|||
|
|||
Barrel
I pick up a barrel but it's to big for the stock i have. can i turn the barrel to fit the stock i don;t want to open the stock up. The stock is A old sacko stock That i want to keep original
|
#2
|
|||
|
|||
That's easy then, get a new barrel that will fit that stock - or a new stock.
My old accuracy smith from the 70's said not to re-turn a barrel without it being properly stress relieved - again. He said it may expand if it's a button'd barrel. Right or wrong I don't know.
__________________
Daryl |
#3
|
|||
|
|||
Barrel
Think the best thing to do, at this point and for your reason, would to obtain a stock from Boyd's and put that action/barrel in for your use now. Bill K
|
#4
|
|||
|
|||
North Fork
Who made the barrel ? Hal |
#5
|
|||
|
|||
not an expert
but i buy a lot of lilja barrels that are already made and sitting on the shelf that are a sendero contour and have them recontour them into lots of other contours, last one was a cz sporter. they all shoot great for me. like i said, not a benchrester or expert.
|
#6
|
|||
|
|||
It's a kriger barrel the gun is a sako 22ppc That is shot out i got a barrel that is a 6ppc that i wanted to put on it but it's to thick.
Last edited by NORTH FORK; 03-07-2015 at 03:13 PM. |
#7
|
|||
|
|||
Your barrel can be turned down , however it is not as simple as it seems. Turning barrels down is a real pain due to the lenght ,taper and steel type .
Chris
__________________
"Genius may have it's limitations but stupidity is not thusly handicapped." |
#8
|
|||
|
|||
That's a barrel brand I haven't heard of before.
Hal |
#9
|
|||
|
|||
Wonder if he meant Kreiger?
|
Thread Tools | |
Display Modes | |
|
|