.20PPC Freebore????

[philip]

.20PPC, 39Gr. B-King

What freebore are you guy`s using????? Zero???


It`s been too long and I`m itching to get started with this caliber again, Please refresh my memory, as the reamer went with the rifle.


Phil.

[trotterlg]

I am expecting my 20-220 Swift reamer this week. On both it and my 20BR I went with no lead no freebore. I know it is not considered proper, but on the 20BR I just seated the bullet deep enough to chamber and let the taper of the bullet lead it into the rifling. Shot fine with no pressure problems. Then I cut a lead with no freebore with the same results, same accuracy and same load. I am doing the same with the 20-220 Swift. You can always cut out some metal if you think you need to. Larry

[DAA]

Phil, I'd go zero for the 39 BK. Both my .20BR's, my .20 Dasher and my .20-250 are all zero freebore chambers and I wouldn't want any freebore for any of the bullets I use (they are all 12T's, too).

The Dasher really likes that bullet, zips it along just stupid fast too. Flattest shooting rig I own. Which, is saying something.

- DAA

[philip]

Hey Dave, How ya been?????

I`ve been wanting to give you a call, but haven`t really come up with a good excuse to do so.......

Hope all is well, I ordered it with zero freebore yesterday, I`m sure that`s what I had before, Dave confirmed it......


Phil.