|
#1
|
|||
|
|||
Wanted - .20 vartarg dies
anybody got a set of dies, or a FL die, wilson seater, ???
|
#2
|
|||
|
|||
Sorry, I don't have any to sell but did recently order a set from an Ebay dealer. Redding Match dies with the micro seater, 's' type FL sizer for $139 which was $20 better than I could find them anywhere else.
http://cgi.ebay.com/Redding-Type-S-M...QQcmdZViewItem Best option I could find for new ones. Steve |
#3
|
|||
|
|||
In the same boat
I couldn't find anything that wasn't over 100.00 with a hefty wait so I called up Redding direct and bought a Bushing neck die directly from them and used my 204Ruger Hornady seater which isn't cartridge specific. Worked great and I was stunned how straight it seated once I checked the run out. Used a 221FB FL die with the expander removed, the nk die and shoot. Results from formed ammo were so good I haven't bothered to buy anything else, figured I wasn't gonna improve so why spend the money.
|
#4
|
|||
|
|||
20 VarTarg Dies
Hornady Custom Grade New Dimension #217103 at Midway $60.99 I bought a set of these last fall and tested ammo off these against ammo loaded with my Wilson dies. The results were very good. Bullet run-out was less than .003 Grouping was as good as the Wilson loads. Mid .3's to mid .4's was not a problem. Paul
|
Thread Tools | |
Display Modes | |
|
|